top of page

Foundry Supply

For the investment casting of stainless steel and special alloys, as well as the production of metal powders. Discover high-temperature resistant crucibles, ladles, and nozzles engineered for maximum service life.

Keramik_Gießereibedarf_Gießpfannen_Magna

Our product ranges

From melt to powder

Keramiktiegel für das Schmelzen von Metallen

Crucibles

For investment casting, special alloys and metal powder production

Zerstäuberdüsen aus Zirkonoxid für die Verdüsung von Metallpulver

Atomizing nozzles

For metal powder production

Gießtiegel aus Feuerfestkeramik für den Feinguss

Ladles

For a steady pour

The crucibles and ladles are suitable for various alloys and melting processes and are available in different materials (see Materials ).

 

Depending on customer requirements we offer different shapes and sizes up to a capacity of 500 kg.

​

The atomizing nozzles are suitable for superalloys, nickel-based alloys, iron-based alloys, as well as alloys of aluminum, rare earths, platinum and copper.

 

Depending on customer requirements, the nozzles can be manufactured in individual shapes.

 

✓ High temperature resistance

✓ High dimensional accuracy

✓ Stable flow behavior

✓ High erosion resistance

✓ Low susceptibility to cracking, even under high temperature differences

CER_Magna_crucibles.jpg

Materials

Aluminum oxide

High-purity aluminum oxide offers exceptional resistance to acidic and alkaline slags. It is a universal raw material for various alloys and melting applications in air or vacuum, with a maximum application temperature of 1620 °C.

 

Chromium-doped aluminum oxide

The chromium content improves resistance to slag attack and extends the product's lifespan. This material is ideally suited for melting in air, but not in a vacuum. The maximum application temperature is 1800 °C.

 

MgO-stabilized zirconium dioxide

Zirconium dioxide is extremely resistant to acidic shells. Doping with magnesium oxide prevents volumetric changes. The material is insensitive to Ni, Mo, Al, Fe, Pb, and Be and is widely used for melting alloys in a vacuum. Its exceptional thermal shock resistance and low erosion tendency ensure excellent melting results up to 2000 °C.

 

CaO-stabilized zirconium dioxide

Zirconium dioxide is extremely resistant to acidic slags. Doping with calcium oxide prevents volumetric changes. Due to its interaction with silicate slags, CaO-stabilized zirconium oxide is primarily used in the melting of platinum alloys. With very good thermal shock resistance and low erosion tendency, its maximum operating temperature is approximately 2000 °C.

 

Magnesium oxide

Magnesium oxide is extremely resistant to basic slags and is used in vacuum melting. The material is not wetted by nickel, cobalt, or iron. With a lower density than zirconium dioxide, magnesium oxide is preferred for X-ray analysis. The maximum operating temperature is 2000 °C.

CER_Magna_Stampfmasse.jpg

Refractory Mixes & Cements

MIPEX

Carefully developed magnesium spinel powder for embedding induction crucibles and ladles during the firing process.

 

Zirconia Backing Mix

Zirconium oxide powder for embedding zirconia casting crucibles before firing in a vacuum furnace

 

Magnatop

Pourable coating mixture, replaces the embedding of crucibles in powder during induction firing, to be mixed with water

 

Magnamal 2

Air-dried, high-purity aluminum oxide coating replaces the embedding of crucibles in powder during induction firing; supplied as a ready-to-use solution.

 

Magnamal 4

Air-dried chromium-doped fire cement, suitable for the production of pouring spouts and channels in distributors and furnace linings.

 

Magnacote

Fire cement for use as a cover for reinforced investment casting molds is supplied as a ready-made solution.

Magna.png

As a representative for the British company Magna Industrials Ltd , we supply companies throughout Germany, Austria and Switzerland with products for foundry needs.

Our customers include companies in the investment casting and furnace industries, as well as precious metal producers. We offer them a wide range of crucibles, ladles, atomizing nozzles, and other refractory products, which can be manufactured in various shapes and from different materials. The shaping process involves isostatic pressing or the vibro-casting method.

Furthermore, our product range includes stamping compounds made of various metals, which are suitable for a wide variety of applications.

CER_Magna_crucibles2.jpg

Technical Data Sheets

Contact us

Allog Ceramics GmbH

Schulstr. 9

27726 Worpswede

Germany

 

info@allog.de

Tel.: +49 4794 4455180

bottom of page